View PEMB9_296654.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
M3D744
PEMB9 PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
Product specification 2003 Jan 07
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
FEATURES * 300 mW total power dissipation * Very small 1.6 mm x 1.2 mm x 0.55 mm ultra thin package * Excellent coplanarity due to straight leads * Replaces two SC-75/SC-89 packaged transistors on same PCB area * Reduces required PCB area * Reduced pick and place costs. APPLICATIONS * General purpose switching and amplification * Inverter and interface circuits * Circuit driver. DESCRIPTION PNP resistor-equipped transistors in a SOT666 plastic package. MARKING TYPE NUMBER PEMB9 MARKING CODE Z6
1
Top view
handbook, halfpage 6
PEMB9
QUICK REFERENCE DATA SYMBOL VCEO ICM TR1 TR2 R1 R2 PINNING PIN 1, 4 2, 5 6, 3 emitter base collector DESCRIPTION TR1; TR2 TR1; TR2 TR1; TR2 PARAMETER collector-emitter voltage peak collector current PNP PNP bias resistor bias resistor MAX. -50 -100 - - 10 47 UNIT V mA - - k k
5
4
6
5
4
R1 TR1 R2
R2 TR2 R1
2
3
1
MAM451
2
3
Fig.1
Simplified outline (SOT666) and symbol.
2, 5 1, 4
MBK120
6, 3
Fig.2 Equivalent inverter symbol.
2003 Jan 07
2
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS - - - - - - - Tamb 25 C; note 1 - -65 - -65 Tamb 25 C; note 1 - MIN. MAX. -50 -50 -10 +40 -6 -100 -100 200 +150 150 +150
PEMB9
UNIT
Per transistor unless otherwise specified VCBO VCEO VEBO VI collector-base voltage collector-emitter voltage emitter-base voltage input voltage positive negative IO ICM Ptot Tstg Tj Tamb Per device Ptot Note 1. Transistor mounted on a FR4 printed-circuit board. THERMAL CHARACTERISTICS SYMBOL Rth j-a Notes 1. Transistor mounted on an FR4 printed-circuit board. 2. The only recommended soldering method is reflow soldering. PARAMETER thermal resistance from junction to ambient CONDITIONS in free air; notes 1 and 2 VALUE 416 UNIT K/W total power dissipation 300 mW output current (DC) peak collector current total power dissipation storage temperature junction temperature operating ambient temperature V V mA mA mW C C C open emitter open base open collector V V V
2003 Jan 07
3
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS VCB = -50 V; IC = 0 VCE = -50 V; IB = 0 VCE = -30 V; IB = 0; Tj = 150 C IEBO hFE VCEsat Vi(off) Vi(on) R1 R2 ------R1 Cc emitter-base cut-off current DC current gain collector-emitter saturation voltage input off voltage input on voltage input resistor resistor ratio collector capacitance IE = Ie = 0; VCB = -10 V; f = 1 MHz VEB = -5 V; IC = 0 VCE = -5 V; IC = -10 mA IC = -5 mA; IB = -0.25 mA VCE = -5 V; IC = -100 A VCE = -0.3 V; IC = -5 mA MIN. - - - - -100 - - -1.4 7 3.7 - TYP. - - - - - - -0.7 -0.8 10 4.7 -
PEMB9
MAX. -100 -1 -50 -150 - -100 -0.5 - 13 5.7 3
UNIT
Per transistor unless otherwise specified ICBO ICEO collector-base cut-off current collector-emitter cut-off current nA A A A mV V V k
pF
2003 Jan 07
4
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
PACKAGE OUTLINE Plastic surface mounted package; 6 leads
PEMB9
SOT666
D
A
E
X
S
YS HE
6
5
4
pin 1 index A
1
e1 e
2
bp
3
wMA Lp detail X
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 0.6 0.5 bp 0.27 0.17 c 0.18 0.08 D 1.7 1.5 E 1.3 1.1 e 1.0 e1 0.5 HE 1.7 1.5 Lp 0.3 0.1 w 0.1 y 0.1
OUTLINE VERSION SOT666
REFERENCES IEC JEDEC EIAJ
EUROPEAN PROJECTION
ISSUE DATE 01-01-04 01-08-27
2003 Jan 07
5
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION
PEMB9
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
II
Preliminary data Qualification
III
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2003 Jan 07
6
Philips Semiconductors
Product specification
PNP resistor-equipped transistors R1 = 10 k, R2 = 47 k
NOTES
PEMB9
2003 Jan 07
7
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2003
SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613514/01/pp8
Date of release: 2003
Jan 07
Document order number:
9397 750 10699

▲Up To Search▲

Price & Availability of PEMB9

	To Download PEMB9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .